TELEPHONE: +44 (0)1932 564391
SALES@STANHOPE-SETA.CO.UK
FIND A LOCAL REPRESENTATIVE

High Temperature Ag-Cu Corrosion Bath

Part Number 11305-2

Stainless steel High Temp Copper Corrosion Bath which is digitally temperature controlled to ±0.1°C over a temperature range of ambient +5°C to 150°C.

Bio fuel compatibleBio fuel compatible

ADDITIONAL INFORMATION

The bath has two test stations, each with a lid and hook for suspending either a copper corrosion test vessel (11500-0) or a test tube support (11420-0). A test tube support can hold up to three test tubes (11590-0). Any combination of copper corrosion vessels and test tube supports may be used.

The top mounted thermostir unit incorporates a low fluid level protection device.

Supplied with: 2 lids, mains lead and instruction manual.

SPECIFICATIONS

Temperature range Ambient +5°C to 100°C
Temperature stability ±0.1°C
Bath fluid Water or Oil
Bath capacity 18 litres
Heater power 1500W
Voltage 110/120V, 50/60Hz 220/240V, 50/60Hz
Size (HxWxD) 52 x 34 x 23cm
Weight 9.5kg
FLASHPOINT VAPOUR PRESSURE CETANE VISCOSITY CORROSION AND RUST KEYWORD SEARCH CATEGORY SEARCH METHOD SEARCH FUEL SPEC SEARCH

Click here request Stanhope-Seta’s new Catalogue now




FEATURES

Ambient +5°C to 150°C temperature range
Copper/Silver corrosion tests
2 test stations
Small footprint

METHODS

ASTM D130-IP 154, ASTM D4048, ASTM D4814, ASTM D7671 Procedure A, BIS IS 1448 Part 15, BS 2000 Parts 112 & 154, EN 2160, FTM 791 5325, IP 112, IP 227 (obs), IP 611, IP PM-DJ 2005

DETAILS OF METHODS

IP 112Determination of corrosiveness to copper of lubricating grease - Copper strip method
BS 2000 Parts 112 & 154Part 112: Determination of corrosiveness to copper of lubricating grease. Copper strip method. Part 154: Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
EN 2160Oxidation. Corrosion
ASTM D4048Standard test method for detection of copper corrosion from lubricating grease
IP PM-DJ 2005Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D4814General Specification for Automotive Spark Ignition Engine Fuels
ASTM D130-IP 154Standard test method for detection of copper corrosion from petroleum products by the copper strip tarnish test
IP 227 (obs)Corrosiveness to Silver of Aviation Turbine Fuels
FTM 791 5325Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
BIS IS 1448 Part 15Petroleum Products - Corrosiveness to Copper - Copper Strip Test
ASTM D7671 Procedure ACorrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
IP 611Corrosiveness to silver of automotive gasoline - Silver strip method