TELEPHONE: +44 (0)1932 564391
SALES@STANHOPE-SETA.CO.UK
FIND A LOCAL REPRESENTATIVE

Setaflash Series 8 Activecool Flash Point Tester-corrosion resisting

Part Number 82150-0

The Setaflash Series 8 'ActiveCool' is an automated closed cup flash point tester with a temperature range of 10 to 130°C (50 to 266°F) with no external cooling required. When connected to a suitable chilled water supply, the range is extended down to -20°C (-4°F).

There are two modes of operation; Flash / No Flash and Ramp. The ramp mode increases the sample temperature at a rate of 2°C/min and automatically dips the ignitor every 1°C up to 100°C (every 2°C above 100°C), until either a flash is detected or the end of test temperature is reached.

Bio fuel compatibleBio fuel compatible
Calibration and verification equipment availableCalibration and verification equipment available
Test certificates availableTest certificates available
APPLICATIONS
FLASHPOINT VAPOUR PRESSURE CETANE VISCOSITY CORROSION AND RUST KEYWORD SEARCH CATEGORY SEARCH METHOD SEARCH FUEL SPEC SEARCH

Click here request Stanhope-Seta’s new Catalogue now


Setaflash Flashpoint tester ASTM/IP

FEATURES

10°C to 130°C (-20°C with external water supply)
Small sample size, 2 or 4ml
Flash/No Flash & Ramp modes
Electric ignitor (gas available using optional accessory)
Automatic dipping and flash detection
ActiveCool electronic Peltier cooling
64 Test memory & RS232 interface
°C or °F temperature display
Corrosion resisting insert

METHODS

ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 3900 Part A13, BS 6664 Parts 3 & 4, CHIPS Regulations, EPA 1020 A & B, IP 523, IP 524, IP 534, ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids