Setaflash Series 8 Activecool Flash Point Tester (corrosion resisting)

Part Number 82150-0

The Series 8 'ActiveCool' is an automated closed cup flash point tester with a temperature range of 10 to 130°C (50 to 266°F) with no external cooling. When connected to a suitable water supply, the range is extended down to -20°C (-4°F).

There are two modes of operation; Flash / No Flash and Ramp. The ramp mode increases the sample temperature at a rate of 2°C/min automatically dips the ignitor every 1°C up to 100°C (every 2°C above 100°C), until either a flash is detected or the end of test temperature is reached.

Bio fuel compatible

Calibration and verification equipment available

Test certificates available

'Seta Plus' Extended Warranty available

Series 8 Flashpoint Tester
More details

FEATURES

METHODS

ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 3900 Part A13, BS 6664 Parts 3 & 4, CHIPS Regulations, EPA 1020 A & B, IP 523, IP 524, IP 534, ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids