TELEPHONE: +44 (0)1932 564391
SALES@STANHOPE-SETA.CO.UK
FIND A LOCAL REPRESENTATIVE

Setaflash Series 8 Closed Cup Flash Point Tester-High temp

Part Number 82000-0

The Setaflash Series 8 is an automated closed cup flash point tester with a temperature range of ambient +5 to 300°C (ambient +9 to 572°F). The instrument uses an electric hot wire ignitor (gas flame option).

There are two modes of flash point operation; Flash/No Flash and Ramp. The ramp mode increases the sample temperature at a rate of 2°C/min, allowing determination of a flash point in accordance with ASTM D7236 and IP 534. The dipping sequence occurs automatically every 1°C up to 100°C (every 2°C rise above 100°C), until either a flash is detected or the end of test temperature is reached. The ignitor uses a new electrical hotwire (a gas flame option is available).

Bio fuel compatibleBio fuel compatible
Calibration and verification equipment availableCalibration and verification equipment available
Test certificates availableTest certificates available
APPLICATIONS
FLASHPOINT VAPOUR PRESSURE CETANE VISCOSITY CORROSION AND RUST KEYWORD SEARCH CATEGORY SEARCH METHOD SEARCH FUEL SPEC SEARCH

Click here request Stanhope-Seta’s new Catalogue now


Setaflash Flash point tester ASTM/IP

FEATURES

Ambient + 5°C to 300°C (Ambient +9°F to 572°F)
Small sample size, 2 or 4ml
Flash/No Flash & Ramp modes
Electric ignitor (gas available using optional accessory)
Automatic dipping and flash detection
64 Test memory & RS232 interface
°C or °F temperature display
Forced air cooling for rapid test cycling

METHODS

ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 3900 Part A13, BS 6664 Parts 3 & 4, CHIPS Regulations, EPA 1020 A & B, IP 523, IP 524, IP 534, ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids